System Components

The Ezy Fit Green IWI system comprises of only a few items:
- Timber studs, with Ezy Fit Hemp Stud Backer affixed & installed against the substrate. (Always ensure the stud is installed to the wall with the hemp stud backer against the substrate)
- Hemp or Wood Fibre Insulation Batt that is pressured fitted between the installed timber studs.
- Reveal board for windows and confined spaces which will not allow a hemp insulation batt to be placed.
- High mortality sealant to seal the joints between plasterboard to ensure air tightness.
- We would expect the installing contractor to supply their own plasterboard.
- Ezy Fit would always recommend the use of an air tightness layer, to enhance the systems effectiveness.
The Ezy Fit Green IWI system hemp batt is a unique product and should not be treated or worked with as you would with a mineral or rock wool product. Please follow the guidance in this installer guide when working with the hemp batt.
Please contact the team at Ezy-Fit if in doubt and always refer to the BEIS Best practice guidance.